It feels great when you finally pass your driving test and can drive independently. Hope I am not over saying it, but the whole new world opens up to you as it’s your wheels, your skills and your way. But honestly, you are not taught each and everything in the driving schools such as; driving on motorways, fueling it up, multi-story car parking and etc.
When it comes to tyre safety, there are couple of what’s when’s and whys you come across regardless of which Brand tyre you use. According to the survey of 1000 young drivers carried out by the Tyresafe and Ingenia, there is still a huge lack of knowledge of young drivers in this particular area and it needs to be worked upon in order to ensure safety.
Did you know?
- 1/3rd of the young drivers don’t even check the tread depths of the tyre.
- 1/2th of the young drivers have never checked their tyre pressure.
- 11/2 of the young drivers don’t even know how to check their tyre condition.
Since tyres are the only part of your vehicle in direct contact with the road, they gradually start to lose pressure. If the tyre starts to deflate slowly, it till consume more energy from the engine to roll it and obviously, will burn more fuel as well. Therefore, the properly inflated tyres save fuel. So there are 3 key checks that you need to make in order to ensure the tyre safety such as; tread depth, tyre pressure and the overall condition. So let’s dig in and understand it further;
Just visit your local fuel station to get the tyre pressure checked regularly using the pressure gauge. If you check out the car manual, you will find the recommended pressure measure in PSI/BAR that’s either inside the fuel tank cover to in the ledge of driver’s door.
You know what’s the best time to check the tyre pressure? The tyre pressure should be checked when it’s cold or when it’s not been driven for the quite long. This will give you the accurate reading.
How the Tyre Pressure is affected? Well there is no exact answer to this since there are many factors involved in it. Mostly, it depends upon the Load, Speed and the way vehicle is driven. Usually, there are 2 pressures mentioned in your car manual. One for the normal use and other when the car is loaded with either passengers or luggage.
Tyre tread depth
Make sure you always check the tread depth on each tyre. What’s the minimum depth? Its 1.6mm and this can easily be tested using a 20p coin. All you need to do is, just place the coin into the tread. If the rim of the coin is visible, it indicates that the tyre is approaching the legal minimum tread depth. In that case. You must consider the replacement.
Do not overlook any exterior damages on your tyre such as cracks, bulges or flat spots. Such damages can cause rapid deflation or even the MOT failure.
Whichever Brand tyre you use, it’s important to consider its safety first. Just check out the article now